FAZ II - fischer India

Product highlights

The distinctive edge holds the expansion clip in position even with reinforcement hits, thus ensuring safe installation.
The interaction of cone and expansion clip significantly increases load-bearing capacity and makes minimum edge distance and axial spacing possible.
With a choice of pre-assembled normal washer or large washer GS and with washer HBS in compliance with wood construction standard DIN 1052 (not pre-assembled).
The protruding hammer-in pin protects the thread from damage during setting.

Your advantages at a glance:

Fewer and smaller anchors are required:

With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required

Dynamic

Perfect alternative to injection systems for dynamic stress: The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles with an immediately loadable fixing point.

Seismic applications in earthquake zones

Always on the safe side with FAZ II Plus: The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.

Service life 120 years

Lasts for eternity: An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).

Installation without drill hole cleaning

The partner for fast installations: The ETA covers the use of hollow drills and diamond core bits. An expert opinion regulates the assembly without drill hole cleaning (M8-M24). This simplifies installation and speeds up the process for efficiency on the construction site.

To the product online catalogue

FAZ II. The champion among the bolt anchors. Powerful & flexible.

The fischer FAZ II is the steel anchor for the highest demands - for heavy loads in cracked concrete.
The FAZ II can be used particularly flexibly thanks to its simple installation. The proven expansion clip safely guides the loads into the concrete and enables the highest load-bearing capacity.

Quick and easy installation of bolt anchors.

The FA-ST II bolt anchor setting tool allows for quick and easy installation of bolt anchors, saving significant installation time in particular during series installation. The projecting thread of the anchor is not damaged during hammering. The bolt anchor setting tool FA-ST II is suitable for commonly available hammer drills (2 - 3 kg) with SDS adapter. Specialised bolt anchors such as the FAZ II, FBN II, FBZ and EXA can be installed using push-through installation more quickly, easily, and safely using the FA-ST II. The setting tool ensures optimal handling, thanks to its low weight

More information

Versions with cap nut

The new versions with special, high cap nut (M10 and M12) are optimal for architecturally demanding applications and offer a visually attractive anchorage. In addition, the cap nut protects against injuries due to its closed shape.

The FAZ II is the only anchor with cap nut and ETA option 1!