The cost-effective fixation without approval - for use in non-cracked concrete.

Bolt anchor FWA (metric)

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Product variants

Download of image data

Product variants

17 Product variant (s)

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Width across nut

Packaging

Amount

Viewed 17 of 17 variant (s)

Advantages

The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
Available with metric and imperial threads

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades

Building materials

Concrete C20/25, non-cracked

* You can find detailed information on building materials in the registration document.

Functionality

The FWA is suitable for pre-positioned and push-through installation.
Prior to installation, place the hex nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hex nut).
When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.

Mounting Strip 1 Picture

1 / 5

1
2
3
4
5

Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Anchor length ( l )	40 mm
Width across nut	10 mm
Packaging	—
Amount	100 pcs.
GTIN (EAN-Code)	4006209455364

Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Anchor length ( l )	70 mm
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209455982

Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	65 mm
Anchor length ( l )	65 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209457887

Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	80 mm
Anchor length ( l )	80 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209457894

Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	95 mm
Anchor length ( l )	95 mm
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209457900

Bolt anchor FWA (metric)

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	80 mm
Anchor length ( l )	80 mm
Width across nut	19 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209456477

Drill diameter ( d₀ )	16 mm
Min. drill hole depth for through fixings ( h₂ )	105 mm
Anchor length ( l )	105 mm
Width across nut	24 mm
Packaging	Folding box
Amount	20 pcs.
GTIN (EAN-Code)	4006209456491

Drill diameter ( d₀ )	20 mm
Min. drill hole depth for through fixings ( h₂ )	160 mm
Anchor length ( l )	160 mm
Width across nut	30 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209458006